Product Center
Three product families — carbon fiber sheets, tubes and custom-machined parts — engineered for UAV, automotive, robotics and industrial applications.
Carbon Fiber Sheets
T300/T700 prepreg laminates in 3K twill and plain weave — from thin panels to 50 mm thick plates, ready for machining or direct use. Every plate is inspected for thickness tolerance, flatness and surface finish before leaving the workshop.
- 3K twill & plain weave, glossy or matte surface
- T300 and T700 fiber grades, custom layup on request
- Custom cutting, drilling and CNC profiling available
- Sheet metal-level flatness with composite-level weight savings
-->
Standard Sheet Program
| Item | Specification | Notes |
|---|---|---|
| Fiber Grade | T300 / T700 | Custom grades on request |
| Weave Pattern | 3K Twill / Plain | UD layup available |
| Thickness | 0.5 – 50 mm | ±0.1 mm typical tolerance |
| Standard Sizes | 500×500 / 1000×500 / 1000×1000 mm | Custom sizes negotiable |
| Surface | Glossy / Matte | One or both sides |
| Resin System | Epoxy | Operating temp. up to ~80–120 °C depending on system |
| Typical Density | ≈ 1.5–1.6 g/cm³ | Grade-dependent |
| Machining | Cutting, drilling, milling, engraving | See Custom Parts & CNC |
* Values are typical for standard products. Detailed datasheets and custom layups available on request.
Where Our Sheets Go
-->
Carbon Fiber Tubes & Profiles
Round, square and rectangular tubes with high bending stiffness and low weight — roll-wrapped or filament-wound to your exact dimensions. Inner and outer surfaces are finished for direct assembly, with optional CNC end-machining for precise fitments and joints.
- Round, square, rectangular and custom profiles
- Wall thickness from 0.5 mm, custom ID/OD combinations
- End machining: threading, slots, precision bores
- Matte or glossy 3K twill / plain outer finish
Tube Program
| Item | Specification | Notes |
|---|---|---|
| Manufacturing | Roll-wrapped / Filament-wound | Process matched to load case |
| Cross Section | Round · Square · Rectangular | Custom profiles on request |
| Outer Diameter | ≈ 4 – 120 mm | Larger sizes negotiable |
| Wall Thickness | 0.5 – 5 mm | Thicker walls by lamination |
| Standard Length | Up to 1,000 mm | Longer lengths negotiable |
| Fiber Grade | T300 / T700 | Custom grades on request |
| Surface | 3K twill / plain, glossy or matte | Colored weave on request |
| End Machining | Cutting, threading, slots, bores | ±0.05 mm with 5-axis CNC |
* Typical program values — send your drawing for a tailored specification and quotation.
Typical Tube Uses
Custom Parts & 5-Axis CNC
From your 3D model to finished component: autoclave molding, precision 5-axis machining and quality inspection — for UAV, automotive and industrial programs.
UAV Frames
Drone airframes, arm joints, motor mounts and gimbal structures — lightweight, rigid and vibration-tuned.
Automotive Components
Engine covers, battery enclosure panels and structural brackets for new energy vehicles, finished to Class-A surfaces.
Equipment Structures
Machine frames, adapter molds and thin-wall cylinders for precision equipment — machined from solid laminate or molded to net shape.
5-Axis CNC Machining
Complex contours, pockets, undercuts and engravings in one setup — tolerance held to ±0.05 mm.
Secondary Operations
Precision drilling, hole threading, surface polishing, clear coating and custom logos on request.
Prototype to Volume
Fast prototype iterations before tooling commitment, then scale to batch production with inspection reports.
Send a File. Get a Part.
We accept STEP, IGES, DWG and PDF formats. Our engineers review each drawing for manufacturability, propose layup and tolerance options, then quote — typically within 48 hours.
- NDA available before file transfer
- DFM feedback to optimize cost and performance
- First-article inspection on every new part number
- Batch traceability from prepreg lot to shipment
-->
Typical Tolerances
| Feature | Typical Tolerance | Remarks |
|---|---|---|
| Overall Dimensions | ±0.10 mm | Molded parts, mold-dependent |
| CNC Machined Features | ±0.05 mm | 5-axis machining centers |
| Hole Diameter | ±0.05 mm | Reamed holes |
| Thickness | ±0.10 mm | Laminate consolidation |
| Surface Finish | Glossy / Matte | Clear coat optional |
* Tighter tolerances negotiable case by case — include your requirement in the drawing.
Need Custom Sizes or a Full Part?
Tell us your dimensions, fiber grade or send a drawing — we quote standard and custom products within 48 hours.